Structured Cabling and Low Voltage Systems for Montana Businesses
Structured cabling is the organized network of copper and fiber that every computer, phone, camera, and door reader in your building depends on. Granite Tech designs it, installs it, and certifies every run, with our own technicians working out of offices across Montana.
What a structured cabling system is, and why it outlasts the gear
A structured cabling system replaces one-off cable pulls with a planned layout. Every outlet runs back to a telecom room, every cable is labeled at both ends, and every run is tested against the performance it was installed to carry. When a desk moves or a new device goes in, your team patches it in the closet instead of paying someone to fish a new wire through the ceiling.
It is also the part of your technology that stays in place the longest. Switches, phones, and cameras get replaced on a cycle, while the cable in the walls carries several generations of them. That is why we plan it around where your business is headed, and why many clients pair it with managed IT services and business phone systems so the cable, network, and voice are designed by one team.
Copper from the telecom room to each desk, phone, printer, wireless access point, and camera location, terminated on jacks and patch panels.
Fiber or copper connecting telecom rooms on different floors, separate suites, or neighboring buildings into one network.
Racks, patch panels, and cable management laid out so the closet stays organized and any port can be traced to its outlet.
Cable tray, J-hooks, and conduit that carry the cable without kinks, crushing, or runs draped across ceiling tiles.
Every run certified with Fluke test equipment and recorded, so you have proof each link performs as specified.
Four services, one cabling crew
Most projects touch more than one of these. A new office needs data drops, a fiber link to the server room, camera runs, and wiring for door readers, and the work goes faster when one crew plans all of it. Here is when each one comes into play.
Voice and Data Network Cabling
Copper runs for computers, phones, printers, and wireless access points, from a few new drops in one suite to a full building. This is where most projects begin, and it covers the low voltage wiring that ties the rest of the building together.
Fiber Optic Cabling
When a run is too long for copper, or you need to link floors, suites, or buildings, fiber carries the backbone. It also suits outbuildings and long runs across a lot, where copper would be exposed to electrical interference.
Business Security Camera Systems
Camera placement, cabling, and recording for entrances, lobbies, lots, and work areas. Banks lean on it for vault and lobby coverage, and dealerships for lot cameras.
Door Access Control Systems
Badge readers, door hardware wiring, and controllers that decide who gets in, when, and through which door, with no rekeying when someone leaves.
Need the switches, firewall, and Wi-Fi that run on top of the cable? Our business network services team designs and installs that layer, so both halves are planned together.
Which cabling services does your project involve?
Pick the project closest to yours. The board shows which of our four cabling services usually come into play and why, so you know what to ask about before the walk-through.
Cabling is planned before the walls close, when every drop is easiest to pull. We coordinate with your architect and electrical contractor so outlet locations, the telecom room, and door hardware match the plans.
A home run to every desk, phone, printer, and wireless access point, terminated in a planned telecom room.
Links the main telecom room to a second closet, another floor, or a separate building when copper runs would be too long.
Camera cable is far easier to place during construction than after the ceilings are finished.
Reader and lock wiring is roughed in with the door schedule, so access control is ready when the doors are hung.
The certifications behind every cable we pull
Granite Tech’s low voltage technicians hold credentials that commercial clients, general contractors, and security-sensitive organizations look for. They shape how we design, install, and test every job, from a handful of drops to a multi-building build.
Certified on Leviton structured cabling products, one of the cabling lines our crews install.
BICSI credentials in telecommunications distribution design and installation practice.
CJIS certified for work in security-sensitive environments, including spaces near criminal justice information.
Every cable run, fiber connection, and network installation is tested, documented, and proven to perform.
The only business in the state of Montana certified with Honeywell US Digital Fire Alerting, for life-safety systems that have to be done right.
Plans, timelines, change orders, and certification testing handled on every cabling job, without surprises.
From walk-through to tested and documented
Cabling is scoped per project. Here is how a typical job moves from first call to handoff, following the same process Granite Tech uses for every installation.
Walk the site
We review the space or the plans, count drops, locate the telecom room, and note the ceilings, walls, and distances that shape each route.
Design and propose
You get a written proposal with scope, pricing, and timeline. On new construction we coordinate plan specs with your architect and contractors.
Install it clean
Cable is pulled on proper supports, terminated, and labeled at both ends, and the telecom room is dressed so it stays readable.
Test and hand off
Every run is certified with Fluke test equipment, and you receive the results and documentation for your records.
Cabling planned around the work your building does
A clinic, a bank branch, and a dealership lot need very different things from the same cable. Our field technicians design, install, and certify each system around how the space is used, and our crews travel statewide from our Montana offices for project work.
New construction cabling design, plan-spec coordination, and installation for AEC firms and their clients.
Cabling and access control for clinics, practices, and hospitals where patient privacy and reliable connectivity cannot slip.
Lot cameras, surveillance, and full structured cabling for dealership groups, service departments, and parts operations.
Secure cabling, vault and lobby surveillance, and access control for community banks, credit unions, and financial firms.
Office build-outs, multi-suite cabling, and access systems for law firms, accounting practices, and consulting offices.
County offices, school districts, and public facilities, with CJIS-certified technicians for security-sensitive spaces.
What contractors and architects say about our crews
General contractors, electricians, and architects can send plans and specs, and we will scope the low voltage package: data drops, fiber, camera runs, and door hardware wiring.
Call 406-505-5061Hospitals, school districts, banks, and construction firms across Montana work with Granite Tech.
Read the case studiesStructured cabling questions, answered
Structured cabling is an organized system of cables and connecting hardware that supports your data, voice, and security systems from one planned layout. Instead of one-off cable pulls, every outlet runs back to a labeled patch panel in a telecom room. That gives your network a reliable foundation, better performance, and a layout that is far easier to manage and grow.
Cat5e supports standard gigabit network speeds and fits basic needs. Cat6 offers more bandwidth for modern business applications. Cat6a supports 10-gigabit speeds across the full 100-meter channel with less interference, which makes it a common choice for high-demand spaces and for planning ahead. We recommend a category based on what the building needs to carry, not a default.
It depends on the size of the building, the complexity of the network, and whether it is new construction or an upgrade. Smaller projects may take a few days, while larger installations can take several weeks. The timeline is set in your written proposal, and we plan the work to keep disruption to your staff low.
Cabling is scoped per project rather than priced from a rate sheet. The number of drops, the cable category, any fiber backbone, the building itself (open ceilings, hard lids, concrete, or finished walls), and the distance from each outlet to the telecom room all affect the price. After a walk-through or a plan review, you get a written proposal with scope, pricing, and timeline.
Yes. Every install is certified to industry standards with Fluke test equipment, and the results are documented, so you have proof that each run meets its performance spec. Labels at both ends of every cable make future moves, adds, and troubleshooting faster for whoever works on the network next.
Yes. We design and install structured cabling for new construction across Montana, including planning, installation, and testing, so the building is ready for its technology on day one. We work directly with architecture, engineering, and construction firms on plan-spec coordination, and our crews travel statewide for project work.
Have a build-out, remodel, or security upgrade coming up?
Request a short call to talk through the space, the timeline, and which cabling services fit. If there is a fit, a written proposal follows with scope, pricing, and timeline, so you know exactly what the job includes before anyone pulls a cable.
Or email CustomerCare@granite.tech