Fiber optic cabling carries your network where copper runs out of reach: between telecom rooms, up through the floors of a building, and across a property to a second building. Granite Tech plans the route, installs the fiber with our own technicians, and tests every strand before we hand over the records.
Copper handles the last stretch to each desk, phone, and access point. Fiber handles the trunk lines: the links between your main telecom room and every other closet, between floors, and out to a second building on the same property. Instead of electrical signals on copper pairs, fiber carries pulses of light through strands of glass, so it covers far longer distances and ignores the electrical noise from motors, lighting, and power lines.
Fiber is one part of our structured cabling work. On most projects it runs alongside the voice and data network cabling that reaches each work area, and the same crew plans both, so the strands, the closets, and the copper drops fit one layout.
Single-mode or multimode, with a strand count sized for the links you need today plus spare strands for the ones you will add later.
Innerduct, conduit, and riser routes that keep the cable within its bend and pulling limits, with a jacket rated for the space it passes through.
Rack-mounted or wall-mounted fiber enclosures that hold the terminated strands and protect them from everyday traffic in the closet.
Each strand finished with connectors that match your switches, plus short fiber patch cords from the enclosure to the equipment.
Every strand tested end to end for light loss, labeled at both ends, and recorded on a route drawing that stays with you.
Fiber is not the right answer for every cable in a building, and copper is not the right answer for every link. Flip the switch to see how each one handles the five jobs we plan for on almost every project.
Standard reach for common 10 Gbps equipment. Bars are compressed, not to scale.
Most buildings use both. When a run is short enough for copper, we say so, because copper is usually the less expensive run to install and the equipment on each end costs less. If you don’t need it, we’ll tell you.
The fiber type decides how far a link can reach and what the optics at each end cost. The strand count decides how many links the cable can carry before someone has to pull another one.
Built for the distances inside a building or a tight campus. Multimode optics cost less than single-mode optics, which makes it a common choice for risers between floors and for links between closets a few hundred meters apart.
A much smaller core that carries light far greater distances. Single-mode is the usual pick for links between buildings, long runs across a property, and backbones you expect to carry faster speeds for many years.
Most links use a pair of strands, one to send and one to receive. We size the cable for the links you need now plus spares, because pulling a second cable later costs far more than adding strands up front. Connectors match your switches, most often the small LC style.
The jacket matters as much as the glass. Riser-rated cable runs vertically between floors, plenum-rated cable goes in ceilings that carry return air, and outdoor or indoor/outdoor cable handles moisture and temperature swings on runs between buildings. The rating has to match the space so the cable does not add to a fire or break down in the weather.
In a typical layout, the main telecom room holds the firewall, the core switch, and the internet connection. Fiber runs from there up to a closet on each floor and out to any separate building. At each closet, a switch with fiber uplink ports hands the traffic to the copper runs that reach every computer, phone, and access point.
Because we also handle network design and installation, the switch ports, optics, and strand assignments come from the same plan as the cable. After go-live, our managed network services team can watch the switches on both ends of each link, so a failing optic shows up as an alert instead of a mystery outage.
It is also how a camera at a detached shop or a far gate gets back to the recorder in the main building. Fiber covers the distance, and a small switch at the far end powers the security cameras over short copper runs.
Each job runs in the order our technicians work, drawn from the ten-step Granite Tech process we use on every project. You see the route, the fiber type, and the price in writing before any cable is pulled.
A technician walks the path between closets or buildings, measures the distances, and checks existing conduit, riser openings, and fire-rated walls.
Single-mode or multimode, the strand count with spares, and connectors that match the switches on both ends, all priced in a written proposal.
Innerduct or conduit goes in first, and the cable is pulled inside its bend and tension limits with the correct jacket rating for every space.
Strands are terminated in enclosures at both ends, and every strand and port gets a matching label.
Each strand is tested end to end for light loss, and you receive the results with a drawing of the route.
Straight answers to the three questions owners and facilities managers ask before they approve a fiber run.
Fiber is scoped per project, never priced per user. These factors move the number most:
Many properties spread out: a shop behind the office, a warehouse across the lot, a second building added years after the first. Those are fiber runs.
Outdoor routes need cable rated for moisture and deep cold, and buried runs belong in conduit set below the frost line. Where conduit already connects two buildings, we check its condition and how full it is before planning to reuse it.
Glass does not corrode, and a fiber backbone installed in proper pathways usually stays in service through several generations of switches. Faster speeds later tend to mean new optics at each end rather than new cable.
What fiber needs is care at the connections. Dust on a connector face causes many fiber faults, so connectors should be cleaned and inspected whenever a link is repatched, and unused ports kept capped.
Granite holds Leviton, BICSI and CJIS certifications and is the only business in the state of Montana certified with Honeywell US Digital Fire Alerting.
Granite Tech has worked with Montana businesses since 2003 and is a 5x MSP501 winner, 2022 through 2026.
Ask about a fiber runInside an office, the speed people feel is usually set by the switches and the internet connection, not the cable. Fiber’s advantage is reach and headroom: it carries 10 Gbps and more across distances copper cannot cover, and its bandwidth ceiling sits far above Cat6. That is why fiber optic cabling goes on backbone links while Cat6 or Cat6A serves the desks.
Multimode suits links inside one building or a compact campus, up to a few hundred meters, and its optics cost less. Single-mode is the choice for links between buildings, long runs, and backbones you want to carry faster speeds for many years. We recommend a type for each link in the written proposal, after walking the route.
No. Fiber internet is a circuit a carrier brings to your building. Fiber optic cabling is the private cable inside and between your own buildings. The two usually meet in the main telecom room, and if you are weighing a fiber circuit from a provider, our page on dedicated internet access covers that side.
Fiber optic cabling is scoped per project. Distance, the route, indoor or outdoor cable, fiber type and strand count, pathway work, and the enclosures and terminations at each end set the price. After a route walk, you get a written proposal with scope, pricing, and timeline before work starts.
Yes. Linking a main office to a shop, warehouse, or second building is one of the most common reasons to install fiber, and it keeps the two buildings electrically isolated. Our technicians work from offices in Missoula, Bozeman, and Kalispell and travel statewide for project work, and the route, cable rating, and conduit needs are set during the site walk.
Request a short call. Tell us what needs to connect and how far apart it sits, and we will set up a route walk and a written proposal. If you don’t need it, we’ll tell you.
Or email CustomerCare@granite.tech
We use essential cookies to keep our site running and optional cookies to help us understand how you use it, improve your experience, and show you personalized content. Learn more about how we use cookies.